Detailed modeling of the video signal and optimal readout of charge-coupled devices

This article provides a practical design methodology to calculate an optimal filter for noise reduction in the readout of charge-coupled devices (CCDs) taking into account the charge transfer and feedthroughs due to capacitive coupling in the CCD. A detailed analysis of the dynamics of the video signal and charge transfer is presented, including the circuital modeling of the output stage of the CCD and the dynamics of the electronics in the video chain before the analog-to-digital (AD) converter. This model is used to compute an optimal filter that minimizes the variance of the pixel noise and uses the samples of the charge transfer, before the charge is fully settled. This is necessary to enhance the performance of previous results that also use optimal filters but do not use the transition samples, while also reducing the pixel readout time, resulting in faster readouts. As a proof of concept for the optimal filter, we present novel experimental results using a Skipper CCD, which has a floating sense node that allows to measure the charge packet an arbitrary number of times. However, this technique can be applied to any CCD that has a readout system that digitally samples the video signal.     

Design and Laboratory Evaluation of a Sequential Spot Sampler for Time-Resolved Measurement of Airborne Particle Composition

A new sampling approach has been developed to enable affordable, time-resolved monitoring of particulate chemical composition, and more generally to provide concentrated samples of airborne particles. Using a newly developed, moderated water-based condensational growth technology, individual particle samples are deposited in a 1-mm diameter dry “spot.” The moderated condensation technology enables this collection with minimal temperature rise, providing robust collection for volatile constituents. Measured collection efficiencies are above 95% for particles in the size range from 0.010 μm to 2.5 μm. A set of 20 or more time-resolved samples, plus blanks, may be collected onto a multiwell collection plate. For chemical analysis the plate is returned to the laboratory, and placed directly into a modified autosampler, without extraction or preparation. The autosampler handles the addition of eluent, extraction, and sample injection without user manipulation. This article presents the design and laboratory evaluation of a 1.5 L/min sampling rate version of this system.

Copyright 2014 American Association for Aerosol Research     

Spatial Quality Evaluation of Pedestrian Streets

This paper presents an assessment of the spatial quality of a pedestrian street located in downtown Bauru, S~o Paulo State, Brazil, from the application of some urban sustainability indicators. Multi-method was used to evaluate the thermal comfort quality of users, urban accessibility and preservation of architectural heritage. The results show that the sustainability indicators, apart from being effective tools in identifying problems, can assist local managers in decision making, planning and monitoring of pedestrian public space. These indicators contribute to a broad diagnosis of the pedestrian street and also the formulation of programs, projects and municipal policies, aimed at providing a better life quality for pedestrians.     

Mechanical properties enhancement in potassium-sodium niobate lead-free piezoceramics: the impact of chemical modifications

The development of (K_0.44Na_0.52Li_0.04)(Nb_0.86Ta_0.10Sb_0.04)O₃-based (KNL-NTS) ceramics is attracting great interest because of environmental concerns. Most of the efforts have been concentrated on improving the electrical properties. However, it is desirable to develop ceramics with good electrical response and high mechanical properties. Therefore, the evaluation of the mechanical properties is substantial and little studied. The aim of this work is to study the mechanical properties of KNL-NTS lead free ceramics doped with Zr evaluating the effects that can give rise to improved mechanical properties. Our results show that the crystalline phase, size and shape of grains in the ceramics are affected by the doping amount. We found that the microstructure does have a close relationship to the mechanical response, more specifically; a uniform and fine grain microstructure is suitable to lead high mechanical strength. Based on these results, the chemical modifications with Zr⁴⁺ ions have a significantly positive influence on hardness, strength and fracture toughness values of KNL-NTS ceramics.     

The development and application of psychophysical methods in upper-extremity work tasks and task elements

This paper examines an approach to modeling the relationship between perceived acceptable work exposures and physical stressors in upper-extremity tasks using psychophysical methods. Several years of laboratory-based studies and results from a variety of simulated work tasks and task elements are summarized. The original impetus of these studies was founded in the pioneering work and successful application of psychophysical methods applied to manual materials handling tasks (e.g., lifting) generally beginning in the 1960s and 1970s. This approach provided unique and feasible solutions to work design problems involving exposure to the hazard of cumulative trauma. Presently, these methods were adapted to studying common upper-extremity tasks and task elements. Results provide conclusive evidence of the impact of required posture, force, gender and other variables on acceptable task frequency. These results and the psychophysical method in general, may be particularly helpful in establishing realistic and reasonable work design guidelines when workers are exposed to multiple, simultaneous hazards such as force, frequency, with deviated posture, etc, and in the absence of well-defined biomechanical or physiological-based models. Finally, a review of psychophysical theory and methods which can be applied to a wide range of occupational activities is provided.     

Microstructural Evolution During Friction Stir Welding of Mild Steel and Ni-Based Alloy 625

Microstructure evolution during friction stir welding (FSW) of mild steel and Ni-based alloy 625 was studied. Regarding the Ni-based alloy, the welding process led to grain refinement caused by discontinuous and continuous dynamic recrystallization, where bulging of the pre-existing grains and subgrain rotation were the primary mechanisms of recrystallization. In the steel, discontinuous dynamic recrystallization was identified as the recovery process experienced by the austenite. Simple shear textures were observed in the regions affected by the deformation of both materials. Although the allotropic transformation obscured the deformation history, the thermo-mechanically affected zone was identified in the steel by simple shear texture components. A new methodology for the study of texture evolution based on rotations of the slip systems using pole figures is presented as an approximation to describe the texture evolution in FSW.     

Taxonomy of the manufacturing strategies of large Spanish industrial companies

This work presents a classification of the manufacturing strategies of large Spanish industrial companies in Spain. For this purpose the various international empirical studies on alternative manufacturing strategies have been taken as a reference, reviewed and compared. The database used in this study is made up of information on 114 factories and has been designed using the information from a survey mailed to the industrial companies which have production plants in Spain and which in the financial year of 1994 (reference date of this research) employed over 200 workers. Cluster analysis methodology has been used and the classification criterion taken was the competitive advantages or strengths of each factory concerning the five competitive priorities in manufacturing: efficiency, flexibility, quality, delivery and customer service. Finally, this work identifies a taxonomy of the manufacturing strategies of a sample of the largest industrial companies in Spain, differentiating three alternative production strategies: flexible marketoriented manufacturers, low-cost quality manufacturers and delivery-based manufacturers. Large industrial companies analysed compete in manufacturing, basically following a choice of three criteria: flexibility, quality or delivery. The companies belonging to each of the three categories identified maintain common and lasting manufacturing objectives and policies.     

Development of α-Tocopherol Acetate Nanoparticles: Influence of Preparative Processes

We studied different methods of preparing α-tocopherol acetate (ATA) nanoparticles, which are to be used in targeting the lungs as aerosols in order to prevent cigarette smoke toxicity. Poly-(lactide) nanoparticles were prepared using nanoprecipitation and solvent evaporation techniques, which produced, respectively, too small and too large nanoparticles to be aerosolized. The emulsification-diffusion method produced 2 months stable nanoparticles with a size between (500–700 nm). Increasing ATA concentration (1–7 mg/mL) induced a decrease in the association rate (97–93%) and in the adsorbed ATA rate (7–4.5%), which was associated with variations of Zeta potentials (?27.5 to ?24.3 mV) and decrease in polymeric wall thickness and density.     

Less cyber,more café: Enhancing existing small businesses across the digital divide with ICTs

About 10% of the world has access to information and communication technologies (ICTs). Telecenters and cyber cafés are one prevalent way to increase access. This paper suggests increasing access through currently existing, local businesses where people already gather and where proprietors already posses existing business relationships with suppliers and customers. This paper questions the prevailing emphasis on the “cyber'' characteristics of access, e.g., computing and internet access as is currently known, and attempts to refocus the conversation by considering computing and access in the context of the “café,” e.g., as public life in the sense of Habermas, which permits an in situ evolution of relevant access. This analysis is based on extant literature and direct ethnographic research in several public places in six countries. We offer example design perspectives based on a reflection of “third places” as inspiration for appropriate innovation in the provision of computing and communications. © 2005 Wiley Periodicals, Inc.